High-Performance CPE for LTE Networks
The new CPE9000 end-customer device provides higher capacity and better service per subscriber.
The outdoor end-user device supports carrier aggregation, with a capability to reach 200 Mbps aggregating two channels of 10 or 20 MHz, allowing for higher user data speeds. It offers extremely powerful connectivity, which overcomes many non-line-of-sight challenges caused by heavy tree foliage. The CPE9000 operates in the 3.4‑3.8 GHz or 2.3-2.7 GHz frequency bands and is especially suited for the CBRS band in the United States. It conforms to the 3GPP Release 10/11 standards, and is an LTE Category 6 CPE, which supports 64 QAM uplink capabilities – increasing the uplink data rate by up to 50%.
The CPE9000 Main Capabilities
- Fully ruggedized IP67 design
- High gain 15dBi embedded antenna
- Carrier Aggregation for non-contiguous channels
- Uplink 64 QAM
- Layer 2 & 3 support
- QoS for multiple services in Layer 2
- CPE locking to eNodeB
- Simple to install, maintain and operate
- Optional residential gateway supporting WiFi 11ac, 1Gbp LAN ports and VoIP
The unique features mentioned such as Layer 2, QoS and Uplink QAM64 are supported as part of Telrad’s full end-to-end solution including BreezeCOMPACT eNodeBs and BreezeWAY EPC – together providing rich features and cost-effective end-to-end fixed LTE solution.
Improved Performance and Return-on-Investment
The CPE9000 is part of Telrad’s end-to-end LTE solution, designed to help fixed operators maximize their profits and lower the Total Cost of Ownership of the network. By improving the network efficiency and increasing data rates, service providers can now offer higher bandwidth packages.
The CPE-View gives operators much better visibility and control of the network elements. Telrad simplifies and lowers the cost of the overall LTE solution to provide small to large ISPs scalable and affordable ACS, which is a mandatory element of each Fixed Wireless Network operation.
CPE-View – CPE Management Module
To support Telrad’s LTE CPE portfolio, Telrad provides the CPE-View mode – part of the BreezeVIEW network management system. The TR69-based ACS server adds CPE management directly into the existing BreezeVIEW network management, which already controls other Telrad products, including BreezeCOMPACT, BreezeWAY EPC, and all Telrad CPE models. The CPE-View provides simple to use, zero touch provisioning and better visibility of the end user devices using highly integrated data collection from all network elements as part of Telrad end-to-end solution. With CPE-View, the operator can track CPE performance measurements (UE KPIs) in a single push of a button right on the BreezeVIEW system.